No compromise, no corners cut, true performance from a truly dynamic machine. The TR6 offers outstanding performance and build quality. This is the narrow access machine with absolutely no limitations, it’s a true 6” machine, hungry for more.
When the customers gave us the wish list of all the things they wanted from a 6” tracked chipper we didn’t skimp one of them, we just maximised them all. This is the result…
If you really want the best of every world then the TR6 will float your boat. This is the narrow access machine with absolutely no limitations & compromises nothing.
Hover to explore
Every Forst fabrication has been stress tested both from a technical engineering and physical point of view. All fabrications are flanged and finished to a high standard.
Twin hydraulic horizontal feed roller system offering exceptional grip on timber. The large top feed lifts on an arc, climbing toward the timber rather than lifting straight up and down, this makes climbing butt ends exceptional. High tension due to twin heavy duty springs and a large bearings supporting either side of the top feed roller ensures strength and durability.
Simply phenomenal velocity when chipping. Forst will throw the chip right to the rear of your wagon due to the open top flywheel system with large gusseted draught fins at the rear. Chip is thrown, not blown meaning blockages on wet material are simply not a problem.
Any bearings which need to be greased on Forst are all easily maintained by a central greasing bank, leaving no excuse for poor maintenance.
Highly intelligent electrical system operating all the electrical functions on the machine including the no stress device. Autoinlelligence will tell you when your machine is due a service, recommended blade changes and can operate as a fuel gauge.
Illuminated touch pad, IP 69 rated and running from a printed circuit board means water and vibration isn’t going to let you down. Safely and conveniently located at either side of the hopper means you don’t have to lean over the hopper to use them.
35hp Kubota 1505 four cylinder Diesel power unit produces the perfect power for this application.
With the hopper removed and tracks retracted this machine will fit through a 31” wide gap, which could be a narrow gateway of pedestrian doorway.
With just 4 bolts the hopper will lift off completely to allow you to get through tight spaces.
|Feed Roller Aperture||6” x 8” (150 x 200mm)|
|Feed Roller System||ForstGrip Feed Roller System|
|Flywheel System||Open Top Flywheel (640 x 25mm) Twin 8” Blades|
|Engine||Kubota Diesel (V1505) 35hp|
|No Stress System||AutoIntelligence No Stress Device|
|Feed System||AutoIntelligence Fully Water & Vibration Proof Touch Pads|
|Fuel Capacity||30 Litres|
|Noise Level||Lwa 122dB|
|Machine Width tracks in/out||800mm / 1150mm|
|Machine Height (Chute On)||2450mm|
Premium materials and build quality
Built to last. Först machines are built to a high standard with premium quality fabricated components power coated to a high standard. There is no compromise with thickness of steel and quality of component parts on a Först machine, these machines are built to stand up to the rigors of the job you do.
Big greasable bearings throughout the robust components gives Först the edge for quality and reliability.
Just two catches give you access to the engine bay for all servicing and engine maitenance. The 'one piece' bonnet hinges up on a heavy duty gas damper allowing unhindered and free access.
The unfastening of two bolts allows the chipping chamber cover to hinge over exposing the flywheel and feed roller mechanism for easy blade changes and routine checks and maintenance.
One bolt gives access to the horizontal anvil which can be turned or replaced in just a few minutes to ensure the blade is cutting against a true and square edge.
A single bank of grease nipples allow you to grease bearings without lifting any covers or removing guards.
A warranty to see you right
Exactly what it says on the tin. Every New Först Woodchipper comes with an absolutely guaranteed, no quibble 3 year warranty to take any concerns related to owning machinery away and make your purchase decision as straight forward as possible. Any machine is only as good as the backup and support given by the manufacturer. With Först you can be assured of the best of both worlds. Warranty to see you right through and outstanding machine performance make Först the perfect work partner for any arboricultural contractor, tree surgeon, council or hire company.
Make no mistake, Först Woodchippers are built to stand up to the hard life you give them and we’ll stand beside you all the way.
Enquire about the Först TR6
Get in touch to request further information or to book a absolutely free, no obligation demonstration. There is nothing like getting a machine working on the job, get in touch to experience Först for yourself!Email Us: firstname.lastname@example.orgCall Us: 01264 721790